A cooling tower is a heat rejection device which rejects waste heat to the atmosphere through the cooling of a water stream to a lower temperature.
• The number of light levels recommended depends on the height of the structure;
• The number and arrangement of light units at each level should be placed so the lighting is visible from every angle in azimuth;
• Lights are applied to display the general definition of an object or a group of buildings;
• The top lights should be placed sufficiently below the top so as to minimize contamination by smoke, etc
• The diameter of the structure determine the number of lights installed at the top and at each light level.
Low intensity lights should be used for structure with H ≤ 45 m during night time, if those are considered inadequate, than medium - high intensity lights should be used.
Medium intensity lights type A,B or C should be used to lit extensive object (group of buildings or tree) or structure with 45 m < H ≤ 150 m.
Note: Medium intensity lights, type A and C should be used alone, whereas medium intensity lights, Type B should be used either alone or in combination with LIOL-B.
High intensity type A, should be used to indicate the presence of an object if its H > 150 m and an aeronautical study indicates such lights to be essential for the recognition of the object by day.