Safe area

HAPI Helicopter Approach Path Indicator

HAPI-LXS provides a visual reference to support heliport approach operations, suitable for both elevated and ground-level platforms. It ensures a clear indication of the correct approach slope, enabling reliable use during both daytime and nighttime operations.

Heliport Lights - CROSS CHEVRON marking lighting

CROSS CHEVRON lighting for hospital heliports. Compliant to ICAO, EASA and CAA standards.

Heliport Lights - Perimeter Light FATO FLAT

The white-coloured model FATO-LXS-FLT is used to delineate the perimeter of the FATO (Final Approach and Take-Off) area, intended for the approach and departure of aircraft during landing or take off.

Heliport Lights - Perimeter Light TLOF FLAT

The green-coloured model TLOF-LXS-FLT is used to delineate the perimeter of the TLOF (Touchdown and Lift-Off) area, intended to contain the aircraft at its maximum footprint.

Heliport Lights - H marking lighting

LUXSOLAR H marking lighting for heliports and vertiports. According to ICAO, EASA and CAA standards.

Heliport Lights - Touchdown Positioning and Circle Lighting

LUXSOLAR Touchdown Positioning and Circle Lighting for heliports and vertiports. According to ICAO, EASA and CAA standards.

Heliport Lights - Portable Lights

LUXSOLAR portable heliport lighting system, for temporary emergency helicopter landing areas. Available in five different colours for several applications.

Heliport Lights - HMS Helideck Monitoring System Repeater Status Lights

According to CAP437 "Standards for Offshore Helicopter Landing Areas", from 1st of April 2021, all moving helidecks must be provided with a Helideck Monitoring System.

Heliport Lights - Perimeter Light TLOF INSET

TLOF (Touchdown and Lift-Off) Perimeter Light for night operation, in compliance with ICAO Annex 14. A lighting system for Touchdown and Lift-Off (TLOF) area must be present in every heliport where night operations are conducted.

Heliport Lights - Perimeter Light TLOF ELEVATED

TLOF (Touchdown and Lift-Off) Perimeter Light for night operation, in compliance with ICAO Annex 14. A lighting system for Touchdown and Lift-Off (TLOF) area must be present in every heliport where night operations are conducted.

Heliport Lights - Perimeter Lights FATO INSET

A lighting system for FATO (Final approach and take-off areas) must be provided at heliports operating at night.

Heliport Lights - Perimeter Light FATO ELEVATED

FATO (Final Approach and Take-Off) Perimeter Light for night operation, in compliance with ICAO Annex 14. A lighting system for Final Approach and Take-Off (FATO) area must be present in every heliport where night operations are conducted.

Heliport Lights - Alignment Lights APL INSET

A lighting system for APL (Aiming Point Lighting) must be provided at heliports operating at night where an "Aiming Point Marking" area is defined.

Heliport Lights - Alignment Lights FPAG INSET

A lighting system for FPAG (Flight Path Alignment Guidance) is used by helicopter pilots to determine the available direction(s) for the approach/departure operations.

Heliport Lights - Heliport Floodlight High Efficiency

The heliport surface lighting is carried out through "floodlights" which must uniformly illuminate the landing or manoeuvring area to allow night operations (loading / unloading passengers or goods, refuelling, etc.) in safety.

Heliport Lights - Lighted Windsock

A windsock is used to indicate the wind direction and its intensity to helicopter operator. Every heliport must be provided with at least one windsock and if the Landing area is used also for night operations, the windosck must be lighted.

Heliport Lights - Heliport Beacon ICAO (HB)

An heliport beacon (HB) should be provided at heliports intended for use at night and that cannot be easily identified from the air by other means.

LUXSOLAR Radio Receiver/Decoder for Heliports L854-LXS

A radio receiver/decoder is a device used by pilots to communicate by air to the ground (Type I).

Heliport Lights - Approach light Flashing type

Heliport Approach Light "HAL-LXS-FL" (flashing type) is use where it is necessary to indicate a preferred approach direction, shall be located in a straight line along to preferred direction of approach.

Heliport Lights - Approach Light Steady Burning Type

Heliport Approach Light "HAL-LXS-SB" (steady burning type) is use where it is necessary to indicate a preferred approach direction, shall be located in a straight line along to preferred direction of approach.

Heliport Lights - Heliport Helihoist Lights

A Helihoist light should be used to inform helicopter piloti if a wind turbine (suitable for hoist activities with qualified personnel) is in a safety condition to begin winching operations for technical staff and operators or not.

Heliport Lights - L801H-LXS Medium Intensity Heliport Light Beacon

An heliport beacon should be provided at heliports intended for use at night and that cannot be easily identified from the air by other means.